Finishing Station

Finishing Touch Smoothing Station

There's virtually no preparation needed to smooth your parts.

It's as easy as 1-2-3.

  1. Place your part in the smoothing chamber for 10-30 seconds. Remove from smoothing chamber and review surface finish.
  2. Repeat step 1 until desired surface finish is obtained (typically 2-4 times).
  3. Hang part in curing chamber and allow to dry (your part will be dry to the touch in 30-45 minutes.)
Finishing Touch Step 1

Step 1

Smooth Part Surface (Smooth Station)

  • Expose FDM Part in the smoothing Chamber 10-30 seconds.
  • Remove from smoothing chamber, review surface finish.
  • Repeat until desired surface finish reached(Typically 2-4 times)
Finishing Touch Step 1

Step 2

Cure Part(Smooth Station)

  • Hang part in the curing chamner of theSmoothing Station.
  • Part will be dry to the touch in 30-45 minutes.
  • Part will be fully cured in 12-18 hours.

    •  

     

Finishing Touch Step 1

Step 3

Burnishing Part Surface(Burnishing Station) Recommended.

  • Lightly blast the part with sodium bicarbonate.
  • Rinse with water to remove any remaining sodium bicarbonate.
  • Burnishing gives your parts an even smoother appearance.

 

 

 

 

Request Sample

See & Feel The Surface Finish Yourself : Request a sample
Get A Smoothed Part

Machine Specifications

Finishing Touch Overview
PDF Download